In-Game Laptop & Tablet¶
PulseCAD can put a real laptop or tablet in your character's world: on the dash of your patrol car, in your hands, or set down on a desk or the hood of a car. Its screen is the live CAD. You see it in 3D, it lights up the car at night, and the people around you can see what is on it. You use it with your own mouse and keyboard, just like the CAD in your browser.
It is an alternative to the classic F7 tablet, the full-screen CAD that opens over your game. Nobody has to use it: a player who never sets up a device keeps the classic F7 tablet exactly as before.
- Who can use it: any member of a PulseCAD community, on a FiveM server running the PulseCAD resource.
- What it costs: nothing extra. It is part of the PulseCAD resource.
- What it is not: it is not a separate CAD. Everything on it (calls, units, reports, records) is the same CAD you use in the browser, signed in as you.
Laptop or tablet¶
There are two devices. Everyone picks their own, and you can switch at any time:
| Device | What it is | Notes |
|---|---|---|
| Tablet (default) | A rugged 10" tablet | No lid. Carried upright against the leg or tucked under the arm. |
| Laptop | A rugged 14" laptop | Has a lid that opens and closes. Carried in both hands. |
If you have a device out when you switch, the new one takes its place where it is.
Getting started¶
- Get in the driver's or front passenger's seat of a car.
- Type
/cad mount. Your device appears on the dash and you go straight into mount adjust (see Mounting it in your car). Press Enter to keep the spot. - Press F7. The camera moves onto the screen and the CAD is yours to use. Press F7 or Esc to look away again.
From now on F7 is your device. A tap opens and closes it, and a hold moves it (see Keys and commands).
The classic F7 tablet
If you have no device set up (none on your dash, none in your hands, none set down near you), F7 and /cad
open the classic full-screen CAD tablet, exactly as they always have. /cad civ always opens the classic CAD
screen, which is the quickest way into the Civilian portal.
Keys and commands¶
Every key has a chat command too, for communities that do not use key binds. Type /cad help in game to list them.
| Key / command | What it does |
|---|---|
F7 (tap) or /cad |
Open or close the CAD on your device |
| F7 (hold) | Take it out of your car, set it down, pick it up, or put it back (whichever fits where you are; a bar fills while you hold and says which) |
H or /cad show |
Turn the screen: to the other front seat in a car, or toward the nearest person when it is set down |
/cad mount |
Put your device on the dash of the car you are in, or move it |
/cad carry |
Take it out of your car or pick it up; at your car door, put it back |
/cad place |
Set it down (on a counter, desk, table or the hood of a car) |
/cad track |
Show a GPS waypoint to a device you left behind; run it again to stop |
/cad reset |
Put your device away, wherever it is |
/cad device laptop / tablet |
Choose the laptop or the tablet |
/cad style hip / folder |
How you carry the tablet: upright against the leg, or tucked under the arm |
/cad civ |
Open the classic full-screen CAD, no device |
/cad help |
List these in the chat |
You can change F7 and H in Settings → Key Bindings → FiveM (look for PulseCAD).
Using the CAD on it¶
When you open your device, the camera eases onto its screen. Your mouse and keyboard now work the screen: click, type, scroll and use the F-keys exactly as you would in a browser. F7 or Esc closes it.
The screen is a small desktop:
| App | What it is |
|---|---|
| PulseCAD | The live CAD, signed in as you, on your community. Your MDT, Fire, Tow or Dispatch console, the Civilian portal, Court, Records: everything you can reach from the hub. |
| PulseCAD Reporting | Records and reports in their own window |
| Notepad | A full notepad: File, Edit and View menus, find and replace (Ctrl+F, Ctrl+H), go to line, font, zoom, word wrap and a status bar. Save keeps a note in Documents on that device, and File Explorer opens it again. |
| File Explorer, Calculator, Settings, Task Manager | What they say. Settings has the wallpaper, brightness, night mode, the screen saver and the lock timer. |
Windows can be moved, resized, minimised and maximised. The PulseCAD window's title follows the screen you are on, for example "PulseCAD - MDT", and shows NO DISPATCH / DISPATCH ONLINE for your server.
- Lock and screen saver. Left alone, the screen saver comes on after 3 minutes and the device locks after 5 minutes; click or press a key and sign in again. Everything you had open is still there. Both timers are in Settings. In the car the screen saver waits while the engine runs and the device is on its mount.
- Your shift. Going on duty, statuses, calls and reports all work as they do in the browser.
Mounting it in your car¶
/cad mount puts your device on the dash of the car you are sitting in and starts mount adjust. The
instructions on screen show the keys:
| Key | Moves it |
|---|---|
| ← / → | Swivel |
| ↑ / ↓ | Height |
| W / S | Reach (toward or away from you) |
| A / D | Side to side |
| Mouse wheel | Tilt |
| R | Turn it around |
| N | Jump to the next preset spot: Center dash, Passenger dash, Console arm |
| Shift (hold) | Fine moves |
| Enter | Save for this car model |
| Backspace | Cancel |
Your mount spots are yours. The spot is saved for you and that car model, not for the community. The next time you mount a device in the same model, it goes to your spot, on any server running PulseCAD. Two officers in the same car model can each have it where they like. A car model you have never set up gets a sensible spot based on your seat.
To move it later, sit in the car and type /cad mount again.
Passengers and the screen¶
- The front passenger can use it. If the driver's device is on the dash, the front passenger presses F7 to take the keyboard; they run their own CAD on it, signed in as themselves. The owner gets it back the next time they press F7.
- H turns the screen toward the other front seat and back, so you can show your partner what is on it.
- Back seats cannot use or turn it.
Carrying it and setting it down¶
| Where you are | Hold F7 to… |
|---|---|
| At your car door, device on the dash | Take it out (it goes into your hands) |
| Carrying it, away from your car | Set it down |
| Carrying it, at your car door | Put it back on its mount |
| Next to it, where you set it down | Pick it up |
Setting it down: a ghost of the device follows where you look. Aim at a surface (a desk, counter, table or the hood of a car) and left-click or press Enter. Q / E turn it, Shift makes fine moves, Backspace cancels.
Using it set down: walk up to it and tap F7. With the laptop your character stands and types; the tablet needs no hands. H turns it toward the nearest person.
Carrying the tablet: /cad style hip holds it upright against your leg, /cad style folder tucks it under your
arm.
Lost it? /cad track puts a GPS waypoint on it (or on the car it is mounted in). /cad reset puts it away
wherever it is.
What other players see¶
- Your screen, for real. Anyone within about 5 m of your device sees what is on it, refreshed every second or few, whether it is on your dash, in your hands or on a desk. A partner in the passenger seat sees your call details; a suspect at the hood sees whatever you have open, so mind what is on screen.
- Every device shows its own owner's screen. Two officers with laptops side by side each see their own CAD on their own device, and each other's on the other.
- Closed is closed. A laptop with its lid shut shows nothing.
- Your character's animations. Other players see you open the lid, type at a set-down laptop and carry the device.
Third-eye (ox_target)¶
If your server runs ox_target, the device also works with Left Alt (third-eye). Nothing changes on servers
without it, and F7 and /cad keep working either way.
| Where you are | Hold Left Alt and look at… | Options |
|---|---|---|
| In a front seat, device on the dash | The device | Use PulseCAD, Adjust the mount, Open / Close the lid, Put it away |
| Standing at your car | Your car (the driver's door is easiest) | Take the laptop/tablet out, Open / Close the lid, Put it away |
| Carrying it | The device in your hands | Set it down, Put it back in the car, Put it away |
| Next to it set down | The device | Use PulseCAD, Take it with you, Open / Close the lid, Put it away |
- Use PulseCAD is the only option that goes into the screen (the same as F7). Opening or closing the lid never does.
- Put it away and Put it back in the car only show when you are at your own car. Set down or carried somewhere
else, bring it back to the car first (or use
/cad reset).
For server owners¶
- Nothing to install. The device ships inside the
pulsecadresource. Download or update the resource from Admin → FiveM and restart it. - Players need to rejoin once after you update the resource for the first time, so their game downloads the device models.
- Optional: ox_lib and ox_target for the third-eye options above. PulseCAD detects them; there is nothing to configure.
- Performance. A device's screen is drawn only while it is within about 12 m of the camera and on screen, and the hidden page behind it shuts down once nobody has been within 25 m of it for a few seconds. A parked car with a laptop in it costs nothing when nobody is nearby.
- Players who do not want it simply never type
/cad mount; their F7 stays the classic tablet.
Troubleshooting¶
| Problem | Fix |
|---|---|
| F7 opens the classic full-screen tablet | You have no device set up. Sit in a car and type /cad mount. |
| "Get out of the car first" when taking it out | Taking it out happens at the car door: get out, stand at the driver's door, hold F7. |
| "Only the front seats can use it" | Back-seat passengers cannot use or turn the device. |
| The screen is black | Walk closer (screens are drawn within about 12 m), and on the laptop check the lid is open. |
| You can't find where you left it | /cad track, or /cad reset to put it away. |
| Left Alt shows nothing on the device | Your server does not run ox_target, or (in the car) you are not in a front seat with your own device on the dash. |
| It does not appear after a resource update | Rejoin the server once so your game downloads the device models. |